The Cisco 4451-X Integrated Services
Router (ISR) is a modular router with LAN and WAN connectivity and supports
several interface modules, including Cisco Service Modules (SMs), or Enhanced
Service Modules (SM-X), and Network Interface Modules (NIMs). The router has
slots that support the interface modules and modular Solid State Drives (SSDs).
The
Cisco ISR 4451-Xs target the following applications:
• Enterprise
applications—Intended as the mid-size aggregation and gateway router typically
residing in a regional or large branch office:
–WAN aggregation at
Cisco Enterprise core
–Branch or regional
office aggregation
–Remote access
aggregation
• Service provider
applications—Intended for high-end Enterprise Branch environments.:
–High-end customer
premises equipment (CPE) for business-quality Internet access
–Service provider
leased line aggregation
–Provider edge (PE)
and high-end customer edge (CE) for Layer 2 VPN or Layer 3 VPN services
–Broadband
aggregation—PPPoE/PPPoA aggregation and Service Selection Gateway (SSG)
–Low-end Ethernet
aggregation
The
Cisco ISR 4451-Xs provide the following capabilities:
•Two single-wide SM
slots that may be combined into one double wide SM slot.
•Three single-wide
NIM slots that may combined into one double wide (NIM1 and NIM2) and one single
wide NIM slot (NIM3). The slots can also support a modular or optional SSD.
•NIM3 slot also
functions as a special hard drive carrier slot.
•1 10/100/1000 RJ-45
Ethernet port for system managements (labeled "GE 0" with "MGMT"
on the left of the connector)
•2 USB 2 Type A host
ports
•1 USB mini-TypeB
Console (placed next to the RJ45 Console port)
•1 RJ45 AUX port with
full modem control signals
•4 10/100/1000 RJ-45
Ethernet ports (labeled GE 0/0/0, 0/0/1, 0/0/2, and 0/0/3)
•4 100/1000 SFP
Ethernet ports (labeled SFP 0/0/0, 0/0/1, 0/0/2, and 0/0/3)
•LEDs for Ethernet
and console status
•LEDs for SATA hard
disk drive activity and status (available on certain models)
•Two DDR3 240 pin
Control Plane DIMM slots which can be replaced
•One DDR3 240 pin
Data Plane DIMM slot which can be replaced
•One compact flash
slot, which is serviceable when the fan tray is removed
•One 30W PoE daughter
card for two of the front Gigabit Ethernet ports which can be replaced (labeled
GE 0/0/0 and 0/0/1)
•One Next Generation
Voice Module (NGVM) providing IP Voice and video capability
•Field replaceable
fan tray
•Dual redundant power
supply units (PSUs) and PoE PSU.
More Related:
Thanks for sharing poe switches
ReplyDelete