Cisco launched
the new Cisco Catalyst 4500E Supervisor8L-E in March, 2016. It’s a low-scale
supervisor for the industry-leading Cisco Catalyst 4500E modular access
platform.
Cisco Catalyst 4500 Supervisor Engine 8L-E
Based on the
best-in-class, high-performance Cisco Catalyst 4500E Supervisor8-E, the Cisco
Catalyst 4500E Supervisor8L-E gives customers the same high availability, IT
simplicity, security and other cutting edge features for low-scale deployments.
Supervisor8-E and Supervisor8L-E will also work with the same
IOS XE software for maximum operational simplicity and flexibility.
The Cisco
Catalyst 4500E Supervisor8L-E supports Cisco Multigigabit Ethernet, a key
Cisco innovation that enables customers to migrate to 802.11ac Wave 2 without
having to rewire their access points to their Cisco Catalyst 4500E switches.
The WS-X4748-12X48U line card on Cisco Catalyst 4500E, supported with Supervisor8L-E, is a 48 port
line card with 12 Multigigabit Ethernet ports. The Multigigabit Ethernet ports
are 10GBASE-T ports that can auto negotiate down to 5Gbps, 2.5Gbps or 1Gbps
based on the connected host/access point capability, the type of cable used and
the length of the cable. By connecting Cisco 802.11ac Wave 2 supported access
points to Multigigabit Ethernet ports on the Cisco Catalyst 4500E, customers
can get up to 5Gbps on existing Cat5e cables or up to 10Gbps on Cat6a cables.
Multigigabit
Ethernet saves customers significant expenses by avoiding re-cabling access
points to Catalyst 4500E switches with Cat6a cables or running two Cat5e cables
between them to get higher speeds. By standardizing on the Cisco Multigigabit line
cards on Cisco Catalyst 4500E, customers get maximum investment protection for
whenever their wireless networks transition to 802.11ac Wave 2.
The Cisco Catalyst 4500E Supervisor8L-E is also fully
integrated with Cisco APIC-EM and Cisco Prime Infrastructure for
IT Simplicity. The Plug and Play (PnP) app on APIC-EM
can be used to simplify deployment across multiple remote sites, saving
enterprise IT teams time and money. With
PnP, the Cisco Catalyst 4500E switches with Supervisor8L-E can be pre-provisioned
and shipped to branches or other remote locations. Once the Cisco Catalyst
4500E switch with Supervisor8L-E is plugged in, the image and configuration are
automatically downloaded and installed on it via the APIC-EM PnP server. The IT
admin can monitor the status of the installs over multiple sites remotely.
The path trace
app on APIC-EM also enables detailed flow-based visibility and troubleshooting
by tracing a path between two hosts. It further provides in depth information
about the nature of each hop, including information such as whether the path
segment is Layer 2 or Layer 3 and which protocols are running on it.
In addition to
these cutting edge features, the Cisco Catalyst 4500E Supervisor8L-E also
supports all other Catalyst 4500E high availability, security and IT simplicity
features. With Stateful Switchover (SSO) and In Service Software Upgrade
(ISSU), customers can get supervisor redundancy on the C4507R+E chassis. The Supervisor8L-E also supports Virtual Switching System
(VSS) for dual homing and inter-chassis redundancy in aggregation deployments.
It also supports Network as a Sensor and Network as an Enforcer capabilities
with Cisco TrustSec, Flexible Netflow, embedded Wireshark and MACSec
encryption.
A number of
customers across different verticals such as finance, health care, and
education are already beginning to standardize on Catalyst 4500E with
Supervisor8-E or Supervisor8L-E. For high scale deployments, the Cisco Catalyst
4500E Supervisor8-E continues to provide industry leading modular access
performance for customers.
Reference From
More Related…
No comments:
Post a Comment