Question:1
What information can be drawn from the output presented in the following exhibit?
A. Interfaces FastEthernet3/1 and FastEthernet3/2 are candidates for becoming the STP root port, but neither can realize that role until BPDUs with a superior root bridge parameter are no longer received on at least one of the interfaces.
B. Devices connected to interfaces FastEthernet3/1 and FastEthernet3/2 are sending BPDUs with a superior root bridge parameter and no traffic is forwarded across the ports. Once the inaccurate BPDUs have been stopped, the interfaces will need to be administratively shut down, and brought back up, to resume normal operation.
C. Devices connected to interfaces FastEthernet3/1 and FastEthernet3/2 are sending BPDUs with a superior root bridge parameter and no traffic is forwarded across the ports. Once the inaccurate BPDUs have been stopped, the interfaces automatically recover and resume normal operation.
D. Devices connected to interfaces FastEthernet3/1 and FastEthernet3/2 are sending BPDUs with a superior root bridge parameter, but traffic is still forwarded across the ports.
Answer: C
Question:2
What can be drawn about VLANs 200 and 202 from the following exhibit?
A. VLAN 200 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 202 carries traffic from isolated ports to a promiscuous port.
B. VLAN 202 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 200 carries traffic from isolated ports to a promiscuous port.
C. VLAN 202 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 200 carries traffic between community ports and to promiscuous ports.
D. VLAN 200 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 202 carries traffic between community ports and to promiscuous ports.
Answer: B Case Study# 1
Scenario:
Online Incorporated is an internet game provider. The game service network had recently added an additional switch block with multiple VLANs configured. Unfortunately, system administrators neglected to document the spanning-tree the topology during configuration. For baseline purposes, you will be required to identify the spanning-tree topology for the switch block.
Using the output of the show spanning-tree command on switch SW-C and the provided physical topology, answer the following questions:
Topology:
Case Study# 1 (Questions)
Question:3
Which Spanning Tree Protocol has been implemented on switch SW-B?
A. PVST+
B. PVRST
C. MSTP/EEE 802.1s
D. STP/EEE 802.1D
Answer: A
Question:4
Which port role has interface Fa0/2 of switch SW-A adopted for VLAN 47?
A. Altemate port
B. Backup port
C. Designated port
D. Root port
E. Nondesignated port
Answer: C
Question:5
Which port state is interface Fa0/2 of switch SW-B in for VLANs 1 and 160?
A. Blocking
B. Disabled
C. Discarding
D. Forwarding
E. Learning
F. Listening
Answer: A
Question:6
Which bridge ID belongs to switch SW-A?
A. 24623 000f 34f5.039b
B. 23768 000d bd03.029b
C. 32768 000d 65db 01dd
D. 32769 000d 65db 01dd
E. 32728 000d bd03 029b
F. 32815 000d bd03 029b
Answer: D Case Study# 2
Question:7
Which bridge ID belongs to switch SW-A?
A. 24588 000f 34f5 03ad
B. 32768 000d bd03 01f1
C. 32768 000d 65bd 0309
D. 32769 000d 65db 0309
E. 32871 000d bd03 01f1
F. 32780 000d bd03 01f1
Answer: A
Question:8
Which bridge ID belongs to switch SW-B?
A. 24588 000f 34f5 03ad
B. 32768 000d bd03 01f1
C. 32768 000d 65bd 0309
D. 32769 000d 65db 0309
E. 32871 000d bd03 01f1
F. 32780 000d bd03 01f1
Answer: A
Question:9
Which port role has interface Fa0/2 of switch SW-A adopted for VLAN 12?
A. Altemate port
B. Backup port
C. Designated port
D. Root port
E. Nondesignated port
Answer: C
Question:10
Which Spanning Tree Protocol has been implemented on switch SW-B?
A. PVST+
B. PVRST
C. MSTP/EEE 802.1s
D. STP/EEE 802.1D
Answer: A
Question:11
Which port state is interface Fa0/2 of switch SW-B in for VLANs 1 and 103?
A. Blocking
B. Disabled
C. Discarding
D. Forwarding
E. Learning
F. Listening
Answer: A
Question:12
Which bridge ID belongs to switch SW-A?
A. 24651 000f 34f5 0302
B. 32768 000d bd03 0394
C. 32768 000d 65bd 036a
D. 32769 000d 65db 036a
E. 32884 000d bd33 0394
F. 45 000d bd33 0394
Answer: D
Question:13
Which Spanning Tree Protocol has been implemented on switch SW-B?
A. VST+
B. PVRST
C. MSTP/EEE 802.1s
D. STP/EEE 802.1D
Answer: A
Question: 14
Which bridge ID belongs to switch SW-B?
A. 24653 000f 34f5 0302
B. 32768 000d bd03 0394
C. 32760 000d 65db 036a
D. 32769 000d 65bd 036a
E. 32884 000d bd03 0394
F. 32845 000d bd03 0394
Answer: A
Question: 15
Which port state is interface Fa0/2 of switch SW-B in for VLANs 1 and 116?
A. Blocking
B. Disabled
C. Discarding
D. Forwarding
E. Learning
F. Listening
Answer: A
Question: 16
Which port role has interface Fa0/2 of switch SW-A adopted for VLAN 77?
A. Altemate port
B. Backup port
C. Designated port D. Root port
E. Nondesignated port
Answer: C Case Study# 4
Question:1
Which Spanning Tree Protocol has been implemented on switch SW-B?
A. PVST+
B. PVRST
C. MSTP/EEE 802.1s
D. STP/EEE 802.1D
Answer: A
Question:2
Which port role has interface Fa0/2 of switch SW-A adopted for VLAN 54?
A. Altemate port
B. Backup port
C. Designated port
D. Root port
E. Nondesignated port
Answer: C
Question:3
Which port state is interface Fa0/2 of switch SW-B in for VLANs 1 and 187?
A. Blocking
B. Disabled
C. Discarding
D. Forwarding
E. Learning
F. Listening
Answer: A
Question:4
Which bridge ID belongs to switch SW-A?
A. 24630 000f 34f5 0343
B. 32768 000d bd03 0318
C. 32768 000d 65db 03b4
D. 32769 000d 65db 03b4
E. 32955 000d bd03 0318
F. 32822 000d bd03 0318
Answer: D
Question:5
Which bridge ID belongs to switch SW-B?
A. 24630 000f 34f5 0343
B. 32768 000d bd03 0318
C. 32768 000d 65db 03b4
D. 32769 000d 65db 03b4
E. 32955 000d bd03 0318
F. 32822 000d bd03 0318
Answer: A Case Study #5
Scenerio:
This item contains several questions that you must answer.You can view these questions by clicking on the corresponding button to the left.Changing questions can be accomplished by clicking the numbers to the left of each question.In order to complete the questions,you will need to refer to the topology. To gain access to the topology,click on the topology button at the bottom of the screen,When you have finished viewing the topology,you can return to your questions by clicking on the Questions button to the left. Each of the windows can be minimized by clicking on the [-].You can also reposition a window by draggring it by the bar. Ferris Plastics,Inc. is a medium sized company,with enterprise network(access,distribution and core) switches that provide LAN connectivity from user PCs to corporate servers.The distribution switches are configured to use HSRP to provide a high availability solution as follows:
-DSW1(Distribution Switch 1)is the primary device for VLAN 101,VLAN 102 and VLAN 105. -DSW2(Distribution Switch 2)is the primary device for VLAN 103 and VLAN 104.-A failure of GigabitEthernet1/0/1 on the primary device should block the primary device frombeing the active device,unless GigabitEthernet1/0/1 on the backup device has also failed.
Troubleshooting has identified several issues.Currently all interfaces are up.Use the running configurations and the available show commands to investigate and respond to the following question.
Topology: Case Study# 5 (Questions)
Question:6
DSW2 has not become the active device for VLAN 103`s HSRP group even though all interfaces are active.As related to VLAN 103`s HSRP group,what can be done to make the group function properly?
A. On DSW1,disable preempt.
B. On DSW1, decrease the priority value to a value less than 190 and greater 150.
C. On DSW2, increase the priority value to a value greater 241 and less than 249.
D. On DSW2, increase the decrement valus in the track command to a value greater than 10 and less than 50.
Answer: C
Question:7
If GigabitEthernet1/0/1 on DSW1 is shut down,what will be the current priority value of the VLAN 105`s HSRP group on router DSW1?
A. 95
B. 100
C. 150
D. 200
Answer: A
Question:8
What is the configured priority value of VLAN 105`s HSRP group on DSW2?
A. 50
B. 100
C. 150
D. 200
More topics about Cisco CCNA exam: Core Topics Covered on the CCNA Exam
No comments:
Post a Comment